Water-based multi-color coating
Instruction：Water-based multi-color coating made from different shape and color water based latex particles and the water based protective adhesive. Water in water multi-color coating has brightly color, large colored particle size after construction, vivid stone effect, and low VOC and smell. Because of its light weight, the pressure on the insulation material is small.
The water-based multi-color coatings are divided into water in water type and sand in water type. The paint surface of the water in water multi-color coating is flat, the sand stone quality of the sand in water multi-color coating is strong with stereoscopic effect and litchi surface texture.
The performance of polymer emulsion affects the particles’ coloring of protective adhesive, and effects the overall adhesion, water resistance and weather resistance of the coating.
Construction process：Brush the special black primer for painting →Paste grid stickers→Spray the multi-color coating→ Move off the grid stickers → Brush the coat paint
| Product name |
Performance indicators |
applications |
performance |
| HN-9301C |
Appearance |
light blue liquid |
Continuous phase of multicolored paint |
Good permeability, does not affect spray、dry color presentation |
| Solid content |
37±1wt% |
| Viscosity.cps(25℃) |
＜100 |
| Particle Size（nm） |
60-70 |
| PH |
7.0-8.0 |
| Minimum Film Formation Temperature（MFT） |
8℃ |
| Ca2+ stability 5%CaCl2: emulsion =1:3, 48h, No Flocculation, No Stratification. |
Pass |
| HN-9311S |
Appearance |
light blue liquid |
Disperse phase of colorful coating |
Package, impermeable color performance, water resistance, excellent adhesion. |
| Solid content |
47±1wt% |
| Viscosity.cps(25℃) |
100-2000 |
| Particle Size（nm） |
90-120 |
| PH |
7.0-8.0 |
| Minimum Film Formation Temperature（MFT） |
29℃ |
| Ca2+ stability 5%CaCl2: emulsion =1:3, 48h, No Flocculation, No Stratification. |
Pass |
