The clear waterproof glue is mainly used to solve the problem of water leakage caused by cracks on the concrete surface, cracks on the wall, bathroom tiles, and sealant. The glue has excellent transparency, water-resistance, and viscosity. Suitable for roller coating and brush coating. Applicable to terraces, bathrooms and external walls, roofs, underground projects, roads and bridges, pools, water conservancy projects, etc.
Polymer cement waterproof coating is a two-component waterproof coating composed of polymer emulsion liquids such as acrylic emulsion and powders such as cement and quartz sand. When in use, the powder and liquid materials must be mixed uniformly on-site, and they are now prepared and used within the required time. It is mainly used for waterproofing of terraces, toilets and external walls, underground works, and tunnels, caves, roads and bridges, pools, and water conservancy projects.
Introduction: The acrylic waterproof coating is a one-component self-drying water-based waterproof coating prepared by adding a pure acrylic polymer emulsion as a base material and adding other additives. It has the advantages of wet surface (no water accumulation) construction, environmental protection, and non-irritating odor, excellent elongation, elasticity, adhesion, and film formation. It is suitable for waterproofing and anti-seepage projects in roofs, walls, bathrooms, basements, and other non-long-term immersion environments. It can also be used in roof waterproofing works with a light, thin-shell structure. It can also be used as adhesives or exterior wall decorative coatings.
Introduction: The polymer cement waterproof coating is a two-component product consisting of Part A (liquid), which is composed of synthetic polymer emulsions (such as polyacrylate, polyvinyl acetate, styrene-butadiene rubber emulsion, etc.) and additives, and Part B (powder), which is composed of special cement, quartz powder and additives. It is a waterproof material with high elasticity and excellent durability of inorganic materials.
Polymer modified cationic water emulsion asphalt waterproof coating
Introduction: Polymer-modified cationic water-based asphalt waterproof coating is a liquid waterproof coating made of acrylic polymer emulsion and cationic emulsified asphalt. It has the characteristics of excellent weather resistance and temperature resistance. It can be applied on the wet base surface, has excellent bonding performance with the base layer, fast drying speed, good elasticity and strength, and easy construction without heating. It is widely used in the basement, bathroom, kitchen, roofing, culvert, tunnel, road and bridge, waterproofing of road base.