Sand and dust curing agent
The dust curing agent is used for sand and dust fixing in sand and dust areas. Dilute with water and spray it on sand and soil to bond sand and soil into blocks to prevent it from being blown into dust. The curing agent is simple in use, economical in cost, free from toxic and harmful substances, and degradable, and has no adverse effect on the environment.
| Product name |
Performance indicators |
applications |
performance |
| HN-152VA |
Appearance |
milk white liquid |
Sand and dust curing agent |
In the natural environment, the degradation rate is fast, pollution-free, suitable for frequent spraying work environment |
| Solid content |
50±1wt% |
| Viscosity.cps(25℃) |
<500 |
| PH |
2.0-5.0 |
| Minimum Film Formation Temperature（MFT） |
0℃ |
| Ca2+ stability 5%CaCl2: emulsion =1:3, 48h, No Flocculation, No Stratification. |
Pass |
| HN-158T |
Appearance |
light blue |
Sand and dust curing agent |
Silicone modified styrene-acrylic emulsion has high dilution ratio. Film strength and toughness, sand, dust adhesion relay strong, room temperature self-forming film, film weather resistance can be excellent, can ensure long-term effect. |
| Solid content |
50±1wt% |
| Viscosity.cps(25℃) |
1500-3000 |
| Particle Size（nm） |
90-160 |
| PH |
6.0-7.0 |
| Minimum Film Formation Temperature（MFT） |
0℃ |
| Ca2+ stability 5%CaCl2: emulsion =1:3, 48h, No Flocculation, No Stratification. |
Pass |
