Waterborne 2K Metal Anti-Corrosion & High-Gloss Topcoat Solutions

Engineered for agricultural & construction machinery, steel structures and industrial metal protection—combining waterborne hydroxyl acrylic dispersions with water-dispersible polyisocyanate hardeners for mirror gloss, salt-spray durability and low-VOC application.

  • Tailored OH gradient: 50%-solids HN-QB2518 (1.8% OH) and HN-QB2522 (2.2% OH) deliver long open time and cost efficiency; HN-QB2533 & HN-QB2033 (3.3% OH) maximize crosslink density, hardness and chemical resistance.
  • Three matched polyisocyanate hardeners: N-1998S (silicone-modified for extended pot life and glass/metal adhesion), N-2099H (high gloss & fullness), and N-2199M (low viscosity, matte-capable).
  • Complete 1K + 2K protection: Combine with HN-5101 or HN-5115 for fast-drying 1K anti-corrosion primers with flash-rust resistance.
All Products →

Application Solutions

Recommended Grades for This Solution

HN-QB2533High-Hydroxyl Waterborne Acrylic Dispersions (OH 3.1%-6%)
Solids 44% ± 1%Hydroxyl content on solids: 3.3%

HN-QB2533 is a high-hydroxyl acrylic dispersion designed for two-component waterborne polyurethane coati…

View details →
HN-QB2522Waterborne Hydroxyl Acrylic Dispersions (OH 1.5%-3%)
Solids 50.0 ± 1.0%Hydroxyl content on solids: 2.2 ± 0.1%

Hydroxyl content on solids: 2.2%. HN-QB2522 is a high-solids, medium-hydroxyl styrene-acrylic dispersion…

View details →
HN-QB2518Waterborne Hydroxyl Acrylic Dispersions (OH 1.5%-3%)
Solids 50.0 ± 1.0%Hydroxyl content on solids: 1.8 ± 0.1%

Hydroxyl content on solids: 1.8%. HN-QB2518 is a high-solids, low-hydroxyl styrene-acrylic dispersion of…

View details →
HN-QB2033High-Hydroxyl Waterborne Acrylic Dispersions (OH 3.1%-6%)
Solids 45.0 ± 1.0%Hydroxyl content on solids: 3.3 ± 0.1%

Hydroxyl content on solids: 3.3%. HN-QB2033 is a high-hydroxyl styrene-acrylic dispersion offering high…

View details →
N-1998SWater-Dispersible Polyisocyanate Hardeners
Solids 98%NCO 19.3%

A 98% solids anionic silicone-modified water-dispersible polyisocyanate hardener with approx. 19.3% NCO,…

View details →
N-2099HWater-Dispersible Polyisocyanate Hardeners
Solids 99%NCO 20.0%

A 99% solids sulfonate-modified water-dispersible polyisocyanate hardener with approx. 20.0% NCO, good h…

View details →
N-2199MWater-Dispersible Polyisocyanate Hardeners
Solids 99%NCO 21.0%

A 99% solids polyether-modified water-dispersible polyisocyanate hardener with approx. 21.0% NCO, low vi…

View details →
HN-5101Industrial Coatings
Solids 48±1%MFT 35

This product is a styrene, acrylate and special functional monomer copolymerized polystyrene emulsion. T…

View details →
HN-5115Industrial Coatings

This product is a styrene, acrylate copolymer emulsion. The product has moderate hardness, good weather…

View details →

FAQ

Formulation & Application FAQ

What NCO:OH index is recommended for waterborne 2K polyurethane coatings?

An NCO:OH index of 1.20–1.30 is typical for industrial metal topcoats to compensate for minor NCO-water side reactions and maximize hardness, water resistance and salt-spray durability. Use our interactive 2K Stoichiometry Calculator on any hydroxyl or hardener grade page to compute exact weigh-out grams.

How do I choose between 50%-solids medium-OH grades (HN-QB2518 / HN-QB2522) and high-OH HN-QB2533?

HN-QB2518 (1.8% OH on solids) and HN-QB2522 (2.2% OH on solids) reduce hardener consumption while offering high film build and long open time. Choose HN-QB2533 (3.3% OH on solids) when higher chemical, alcohol and scratch resistance are required.

How can formulators minimize flash rust on bare steel substrates?

For acid-stable dispersions such as HN-QB2522 and HN-QB2518, neutralizing above pH 7.0 improves flash-rust resistance on carbon steel, while acidic pH favors adhesion on difficult non-ferrous metals. Pair with a compatible nitrite-free flash-rust inhibitor.

Can water-dispersible polyisocyanates be incorporated under low-shear or hand mixing?

Yes. Pre-diluting N-1998S or N-2099H to 70–80% solids in a suitable water-miscible co-solvent (e.g., PMA or DMM) significantly lowers viscosity and enables clean, fine dispersion even under manual mixing.

WhatsAppSally Deng · +86 153 1895 6045

We record IP addresses and page views for 90 days for site analytics. No tracking cookies are used.